The NOx sensor 5WK9 7366 is part of a NOx reduction aftertreatment system in diesel vehicles using a urea-based SCR system. In 5WK9 7366 NOX sensors, NOX is separated into nitrogen and oxygen by catalytically active electrodes. The NOx sensor 5WK9 7366 can simultaneously measure and exhaust NOx, which can quickly and accurately detect the NOx concentration level in the gas.
NOx Sensor OEM No.5WK9 7366
Independently develop signal processing and HW/SW control for compatibility with the best detection technology
Independently develop dedicated chips that are highly integrated reliable,and low cost
MOQ depends on our your demands, we welcome trial order before mass production. Send me email for more details.
OEM No.5WK9 7366
Model Number:5WK9 7366
Voltage:12V
OEM NO:22303391
Kreation Model #:K107A0
| Measuring Rang of NOx | 0~2500ppm O2: -12%~21% |
| Precision/Accuracy of NOx | 0~100ppm:±10ppm;100~500ppm:±10%; 500~1500ppm:±15%; 1500~2500ppm:±30% |
| Precision/Accuracy of O2 | 0%~5%:±0.25%;5%~21%:±5% |
| Light-off | The measurement status can be reached within 160 seconds |
| Response Time | T(10-90%): NOx<5300ms T(10-90%): O2<4900ms |
| Supply Voltage | 12V |
| Length of Cable | 410mm.650mm,950mm,customized |
| Discharge Temperature | 800℃ |
| Place of Origin | HuZhou,Zhejiang,China |
| Part Name | NOx sensor |
OEM No.5WK9 7366
Application:Passenger
Warranty:12 Months Every product will be tested before the shipment, if you get any problems with our product, please contact us in the first time, we will response as soon as possible.
Hardware: NOx sensor probe automatic production line (powder press-fitting, air tightness testing, protective cover press-fitting, laser welding, wiring-harness installation, function testing, automatic blanking, testing position data will be recorded and upload to the MES system), probe aging facility (data recorded and upload to the MES system), SCU production line (dispensing the glue, spot welding, curing, laser marking, calibration), package.
IT system: from order to product deliver (parts, material sourcing) all of process data are recorded in ERP and MES system, Quality Management System (tracing every test position, every batch material, every core part such PCBA and ceramic chip) realize process tracing for quality analysis and management.
The company adheres to the road of independent innovation. It has completed the research and development of NOx sensors, exhaust gas temperature sensors and urea tank sensors and gradually realize mass production, equipped with automatic assembly production line, intelligent production off-line detection equipment, ERP system, MES system, WMS system and other hardware and software systems, to achieve the intelligent, informational and integrated process of production, quality inspection and traceability , and strive to become the leading enterprise of automotive electronic intelligent sensor.
