Welcome To KET

NOx Sensor 5WK9 6606

The NOx sensor 5WK9 6606 is part of a NOx reduction aftertreatment system in diesel vehicles using a urea-based SCR system. In 5WK9 6606 NOX sensors, NOX is separated into nitrogen and oxygen by catalytically active electrodes. The NOx sensor 5WK9 6606 can simultaneously measure and exhaust NOx, which can quickly and accurately detect the NOx concentration level in the gas.


Product Features:

NOx Sensor OEM No.5WK9 6606
Independent research and development of signal processing and software and hardware control, compatible with the best detection technology.
Independently develop dedicated chips that are highly integrated reliable,and low cost.

Product Parameters:

OEM No.5WK9 6606
Model Number:5WK9 6606
Voltage:12V
OEM NO:A0035428818
Kreation Model #:K1040B

Measuring Rang of NOx 0~2500ppm O2: -12%~21%
Precision/Accuracy of NOx 0~100ppm:±10ppm;100~500ppm:±10%;
500~1500ppm:±15%; 1500~2500ppm:±30%
Precision/Accuracy of O2 0%~5%:±0.25%;5%~21%:±5%
Light-off The measurement status can be reached within 160 seconds
Response Time T(10-90%): NOx<5300ms
T(10-90%): O2<4900ms
Supply Voltage 12V
Length of Cable 410mm.650mm,950mm,customized
Discharge Temperature 800℃
Place of Origin HuZhou,Zhejiang,China
Part Name NOx sensor

Application and After-Sales Service:

OEM No.5WK9 6606
Application:Passenger
Warranty:1Year Each probe is completed by a fully automatic production line. There are 2 inspections in the production of the probe, and each probe is activated 24 hours. Products will be 100% tested and calibrated before shipment.

We are R&D manufacturer whose workshop is managed strictly according to IATF 16949 standard, we have a highly automated production line and MES system to help us keep good quality and reliable cooperation for global valued customers. Our main products are Nitrogen Oxygen Sensor, Exhaust Temperature sensor and Urea Quality Sensor.

Hardware: NOx sensor probe automatic production line (powder press-fitting, air tightness detection, protective cover press-fitting, laser welding, wire harness installation, function detection, automatic cutting, detection position data will be recorded and uploaded to the MES system), probe aging Equipment (data logging and uploading to MES system), SCU line (dispensing, spot welding, curing, laser marking, calibration), packaging.

IT system: from order to product deliver (parts, material sourcing) all of process data are recorded in ERP and MES system, Quality Management System (tracing every test position, every batch material, every core part such PCBA and ceramic chip) realize process tracing for quality analysis and management.

Inquiry

*Please Feel Free To Leave Your Needs Here, A Competitive Quotation Will Be Provided According To Your Requirement.

*
*
Please Choose:
*
Name * Email *
Tel Country Message *
x